Sun Microsystems 220R - Manual (Page 207)

Useful tests to run on your system are listed below.
SunVTS Test Description
ecpptest
Verifies the ECP1284 parallel port printer functionality
cdtest
Tests the CD-ROM drive by reading the disc and verifying
the CD table of contents (TOC), if it exists
disktest
Verifies local disk drives
fputest
Checks the floating-point unit
fstest
Tests the integrity of the software’s file systems
m64test Tests the PGX frame buffer card
mptest
Verifies multiprocessor features (for systems with more than
one processor)
nettest
Checks all the hardware associated with networking (for example,
Ethernet, token ring, quad Ethernet, fiber optic, 100-Mbit per second
Ethernet devices)
pmem
Tests the physical memory (read only)
sptest
Tests the system’s on-board serial ports
tapetest
Tests the various Sun tape devices
vmem
Tests the virtual memory (a combination of the swap partition and the
physical memory)
7.8.1 For More Information
The following documents provide information about SunVTS software. They are
available on the Solaris on Sun Hardware AnswerBook. This AnswerBook
documentation is provided on the Sun Updates CD for the Solaris release you are
running.
4 SunVTS User’s Guide
This document describes the SunVTS environment, including how to start and
control the various user interfaces. SunVTS features are described in this
document.
4 SunVTS Test Reference Manual
Diagnostics and Troubleshooting 207