SMC Networks EliteView 6.20 - Manual (Page 221)

T
RAP
M
ANAGER
I-29
Cause: The version of winsock.dll did not match the requirement for TFTP.DLL.
Action: Change the TCP/IP stacks and winsock.dll.
The winsock.dll should at least support version 1.1
Cause: The version of winsock.dll is too old.
Action: Upgrade the TCP/IP stacks platform.
Action: Check the network subsystem by error code.
Windows socket version %d.%d required, but not supported by winsock.dll.
Cause: The version of winsock.dll did not match the requirement for TFTP.DLL.
Action: Change the TCP/IP stacks and winsock.dll.
Winsock.dll not able to support minimum number of sockets required by TFTP module.
Cause: Too many WinSocket applications are in use.
Action: Close some WinSocket applications and retry.
Trap Manager
Invalid format in section [enterprise] entry xxx.
Cause: An invalid format in TRAP.INI entry xxx.
Action: Correct it and restart Trap Manager. (Refer to Appendix B in this User’s Guide for information on writing
TRAP.INI)
MIB variable (var_label) not found.
Cause: MIB variable(s) for specific Trap(s) not found in the MIB Database.
Action: Load the MIB(s) which contains these variable(s) into the MIB Database, and restart the Trap Manager.
Out of memory.
Cause: Out of memory.
Action: Close other programs and retry.
Trap Manager cannot register trap channel.
Cause: (Internal error.) Cannot register a trap channel.
Action: Contact SMC Technical Support.