SMC Networks EliteView 6.20 - Manual (Page 210)

E
RROR
M
ESSAGES
I-18
Cause: The index variable(s) listed in the entry variable cannot be found in the MIB database.
Action: Load MIB file which contains the index variable(s) into the MIB database
Invalid object type. It must be COUNTER, INTEGER, GAUGE or TIMETICKS.
Cause: Invalid object type.
Action: Object type must be COUNTER, INTEGER, GAUGE or TIMETICKS.
Line xxx: Bad Record.
Cause: A bad record found in line xxx.
Action: None. (The record will not display in the list box.)
Line xxx: Invalid value will be discarded.
Cause: An object in line xxx has an invalid value.
Action: None. (The invalid value will be discarded and given a default value.)
No SNMP Request.
Cause: Improper command sequence.
Action: Perform SNMP Get, Set or GetNext before action (pause, resume or delete).
Next object not under current subtree.
Cause: The SNMP GetNextRequest cannot display the next subtree in the current window.
Action: Create another subtree (“Tree/Subtree” menu) which contains the object and perform the SNMP
GetNextRequest again.
Object not found.
Cause: Specified object not found in MIB database.
Action: Specify exact object label or object ID again, or load the MIBs file into the MIB database.
Out of memory (UpTree).
Cause: There is not enough memory to expand the MIB tree.
Action: Close other MIB tree windows or collapse some subtrees.
Polling interval must not be less than timeout.
Cause: The polling interval must not be less than the timeout.
Action: Modify the value for the polling interval or timeout.
Root node not found.
Cause: (In MIB tree window) Specified root object not found in the MIB database.
Action: Add a new MIB that contains the required object into the MIB database.