SMC Networks EliteView 6.20 - Manual (Page 192)

T
ROUBLESHOOTING
H-2
Distributable Software
Symptom
Discovery does not find any devices.
Possible Causes
1. EliteView network management station (NMS) may be using an IP address that is used by another device.
2. There may be a cabling problem.
Suggestions
1. Try changing the address of the EliteView NMS.
2. If EliteView is running, you should see a trap and an alarm indicating that a device has been restarted. From
the Alarm Log, copy the IP address into the search criteria and attempt to discover this node. If the node still
cannot be located, check for cabling or other logical problems.
Trap Manager: MIB Variable Not Found
This agreement is governed by the laws of the Province of Alberta, Canada. The CodeBase DLL SUB-LICENSE
consents to jurisdiction in the province of Alberta, Canada.
Symptom
Running Trap Manager shows this error message.
Possible Causes
1. The specified variable does not exist in the MIB database.
2. The MIB database has been changed.
Suggestions
Verify that the specified variable does exist in the MIB database.