SMC Networks EliteView 6.20 - Manual (Page 138)

U
SING
RMON
9-24
Configuring Filters – You can set up to 20 filters for each channel. Just highlight the concerned channel and then
press the Filter button. If you define more than one filter, they will be OR’ed together and compared against data
crossing the specified interface. To configure filters, click on the Add (Edit) button to add (edit) an entry. The
dialog box that opens is described in the following table.
Buffer control
Index A number that identifies this buffer in the buffer control table.
Description A comment provided by the user describing this channel.
Buffer Displays the buffer for the selected control entry.
Filter Displays the filter control table.
On/Off This button is used to manually enable or disable the capture channel.
Refresh Time for
Control Table The refresh interval for this control table. Range: 5-600 seconds
Separate Tables Displays a tabbed window with the channel, filter and buffer tables.
Table 9-18 Channel and Buffer Control Table
Field Description