beautypg.com

I-11 – SMC Networks EliteView 6.20 User Manual

Page 203

background image

D

ISCOVERY

I-11

The ipnode= entity of [discover] in NETMGR.INI is not correct!

Cause: The content of ipnode= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.

The ipxnode= entity of [discover] in NETMGR.INI is not correct!

Cause: The content of ipxnode= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.

The nwserver= entity of [discover] in NETMGR.INI is not correct!

Cause: The content of nwserver= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.

The path= entity of [bitmaps] in NETMGR.INI is not specified.

Cause: Cannot find the path information for bitmap files.
Action: Use a text editor to edit NETMGR.INI.

The protocol= entity of [discover] in NETMGR.INI is not supported.

Cause: The content of protocol= entity is not correct; should be UDP, IPX or ETHERNET.
Action: Use a text editor to edit NETMGR.INI.

The retry value should be in the range of 1 to 10!

Cause: The retry value is out of range.
Action: Use a text editor to edit NETMGR.INI.

The scan value should be in the range of 1 to 10!

Cause: The scan value is out of range.
Action: Use a text editor to edit NETMGR.INI.

The total= entity of [device] in NETMGR.INI is not specified.

Cause: The total= entity must be specified.
Action: Use a text editor to edit NETMGR.INI.

The value of repoll in NETMGR.INI is not in the range of 1 to 10!

Cause: The repoll value is out of range.
Action: Use text editor to edit NETMGR.INI

There are two nodes with the same IP address - %%!

Cause: An IP address has been duplicated.
Action: Write down the MAC addresses for troubleshooting.