Sharp AR-507 - Manual (Page 9)

1-5
CHAPTER
1
POWER ON AND OFF
The power switch is located on the left side of the copier. When the
power switch is turned to the “ON” position, the message “
WARMING
UP. PLEASE WAIT. ” will appear in the message display. Warming
up takes less than 150 seconds. Once the copier is ready, the
message display will change to “
READY TO COPY. ”, and the START
( ) key indicator will light up, indicating that copying is possible.
If the copier has been programmed in the auditing mode, the message
“
ENTER YOUR ACCOUNT NUMBER. ----- ” will appear. Once a valid
account number has been entered, copying will become possible.
GETTING STARTED
Power on and off
Power on
Power off