Sharp AR-507 - Manual (Page 38)

3-4
CHAPTER
3
SPECIAL FUNCTIONS
Margin shift
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left,right, up or down as
described in step 4 below.
● The standard shift amount is 10mm (1/2"), but can be changed from 0mm
to 20 mm in 1mm increments (from 0" to 1" in 1/8" increments).
● When copying originals from the RSPF onto extra size copy paper , the
expanded margin might not be properly made.
★ KEY OPERATOR The initial shift setting can be changed from 0mm to
20 mm in 1mm increments (from 0" to 1" in 1/8" increments). See page 8-
18.
NOTE:
The front side and reverse side are referred to as “SIDE 1” and “SIDE 2”
respectively on the touch panel.
MARGIN SHIFT
Expanded margin
Copy Original
1 Place the original in the document feeder tray or on the
document glass.
2 Press the SPECIAL MODES key.
● The SPECIAL MODES screen will appear.
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO CO
(Initial setting:
copy image shifted to the right)
Margin is expanded here.
Margin is expanded here.