Sharp AR-507 - Manual (Page 37)

3-3
CHAPTER
3
5 Press the Y key.
● The copy ratio in the vertical (Y) direction will be highlighted.
6 Use the reduction, enlargement, and ZOOM ( , )
keys to change the copy ratio in the vertical (Y) direction.
● To change the copy ratio in the horizontal direction again, press
the
X key.
● The message “ IMAGE IS LARGER THAN THE COPY PAPER. ”
may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START ( )
key, a copy will be made.
7 Press the “OK” key.
8 Press the “PAPER SELECT” key and select the paper
tray with the desired paper size.
● If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratios.
9 Enter the desired number of copies.
10 Press the START ( ) key.
● If the document feeder is used, scanning of originals and copying
will start.
● If the document glass is used in the SORT mode, proceed to the
next step.
11 Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
● Copying will start at this time.
● Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
● To cancel this function, press the “CANCEL” key or the “XY
ZOOM” key again as in step 3.
SPECIAL FUNCTIONS
XY zoom
TO COPY.
X
Y
100%
ZOOM
%
%
50
100
%
%
%
READY TO COPY.
AUTO
EXPOSURE PAPER SELECT
X-50% Y-70%
COPY RATIO
AUTO 8/ 11 1
2
1.
2.
A4
A3
1 2 3
4 5 6
7 8 9
0 P
PROGRAM AUDIT CLEAR
INT
CA
CLEAR ALL
START
XY ZOOM
READY TO COPY.
AUTO
XY ZOOM
X
Y
ZOOM
50
100
70%
64%
50%
EXPOSURE PAPER SELECT
AUTO A4
%
%
100%
CANCEL
OK
141%
200%
400%
AUTO
AUTO IMAGE
EXPOSURE PAPER SELECT
X-50% Y-70%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
A4