Sharp AR-507 - Manual (Page 126)

7-12
CHAPTER
7
Staple jam removal
If staples become jammed in the stapler, “ CHECK STAPLER POSITION
OR STAPLE JAM. ” will be displayed. Remove the jammed staples in the
manner described below.
1 While holding the finisher release lever, slide the finisher
away from the copier.
2 Lower the lock lever to unlock the stapler unit.
3 Turn the stapler unit to face up.
4 Hold the staple box release lever to unlatch the staple
box.
5 Remove the staple box.
6 Lower the lever at the end of the staple box and remove
the jammed staples.
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
FINISHER (AR-FN3)