Sharp AR-507 - Manual (Page 88)

4-8
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
finisher (AR-FN3). For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
Photoconductive drum
The AR-507 Copier has advanced process control technology which
improves copy quality uniformity. This feature stabilizes copy quality
throughout the life of the photoconductive drum by automatically
compensating for the changes in drum characteristics due to wear,
operator use patterns, and environmental conditions. The automatic
adjustments are made in response to a sensor that detects the
reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1 Store the supplies in a location that is:
● clean and dry,
● at a stable temperature,
● not exposed to direct sunlight.
2 Store copy paper in the wrapper and lying flat.
● Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.