Sharp AR-507 - Manual (Page 24)

2-10
CHAPTER
2
3 Press the 2-SIDED COPY key.
4 Press the key on the touch panel.
5 Press the “OK” key.
6 Use the 10-key pad to enter the desired number of
copies.
● The number will be shown in the copy quantity display.
● Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
7 Press the START ( ) key.
● The original will be scanned each time the START ( ) key is
pressed, but copying will not begin yet.
8 Remove the first original and replace it with the next
original after the START (
) key indicator lights up, and
then press the START ( ) key.
9 Repeat step 8 until all originals have been scanned.
Then, press the “READ-END” key on the touch panel.
● Copying will start after the “READ-END” key is pressed.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
● To cancel a copy run, press the CLEAR ALL ( CA ) key.
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
1 2 3
4 5 6
7 8 9
0 P
PROGRAM AUDIT CLEAR
INT
CA
CLEAR ALL
START
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
3
AUTO A4
READY TO COPY.
2-SIDED COPY OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
OK 2-SIDED COPY
AUTO A4
AUTO