Sharp AR-507 - Manual (Page 4)

2
[Inch series]
[AB series]
1.
2.
A4
A3
1.8/ 11
2.11 17
1
2
INTRODUCTION
The AR-507 copier is a digital image processing copier which provides high productivity and convenient features
including intelligent image-editing functions.
Amongst its many useful features and functions are the document feeder, various special functions such as dual page
copying, margin shift, erase, XY zoom, and black and white reverse functions, photo copying, and an internal auditor.
If this copier is connected with another copier of the same model equipped with the same options through the tandem-
connection cable (AR-CA1), copying can be performed using the two copiers allowing copying to be twice as fast as
copying on one copier when making multiple copies. Also, the JOB BUILD mode allows copies to be made of
multipage documents of up to 120 pages (the limit, however, might be up to 60 pages of B4 or A3 (8-1/2" x 14" or 11"
x 17") paper size when the copier is equipped with some option) by dividing the document into sections small enough
(50 pages or less) and sequentially feeding through the document feeder.
The digital processing system of the copier allows multiple sets of copies to be sorted without the aid of a sorter. This
copier can be equipped with an optional large capacity tray which holds 3,000 sheets of copy paper. The machine
can also be equipped with an optional finisher to provide finished copy sets ready for distribution.
This copier was also designed with ease of use in mind. The easy-to-understand operation panel with touch panel
system and INFORMATION function will guide the user through most operations. To gain the maximum benefit of
all the features of the copier, however, it is recommended that users first read this manual to become familiar with
all the features of the copier.
NOTE:
This manual describes only copier features. For a description of optional printer features and scanner features, see
the separate relevant manual.
USING THIS MANUAL
This manual is intended as an operation guide for both general users and key operators.
For General Users
It is recommended that you read the GETTING STARTED, MAKING COPIES, and SPECIAL FUNCTIONS sections
to become familiar with the available features and functions of your copier. Then refer to the manual as needed to
become thoroughly familiar with those features you will normally use.
For Key Operators
Please read all sections thoroughly to become familiar with all features and functions of your copier. Throughout the
manual, information which is relevant to key operator functions is noted by “
★ KEY OPERATOR. ” Please pay close
attention to these notes and to the SUPPLIES, COPIER TROUBLE?, GENERAL INFORMATION, and OPTIONAL
EQUIPMENT sections so you can ensure smooth and efficient operation of your machine.
The KEY OPERATOR’S GUIDE section has been written especially for you. It contains the programs and
programming information that will enable you to tailor functions for maximum benefit
to your company.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
● The inch series specifications are quoted in brackets.
For example:
Page 2-3 ------------------------------------------ B4 and A3 (8-1/2" x 14" and 11" x 17")
Page 2-12, step 3, Menu 1-A ---------------- 86%, 81%, and 70% (77% and 64%)
● Although AB series size indications are shown on the touch panel of this manual,
inch series indications are displayed on the inch series machines.
Depending on the country or area, some keys of this copier will be indicated with
either an English name or a symbol. ––Example: INFORMATION (
) key,
PROGRAM (
P
) key, START ( ) key.