Sharp AR-507 - Manual (Page 60)

3-26
CHAPTER
3
SPECIAL FUNCTIONS
Image editing functions
IMAGE EDITING FUNCTIONS
7 Select a type of border line.
● Select the solid line, broken line or no border line.
8 Press the upper “OK” key.
9 Make all other desired copier selections and enter the
desired number of copies.
● If the required area of the originals is not included on the copies,
select a proper reduction ratio.
10 Press the START ( ) key.
● If the document feeder is used, scanning of originals and copying
will start.
● If the document glass is used in the SORT mode, proceed to the
next step.
11 Replace the finished original with the next original after
the START (
)key indicator lights up, and then press
the START ( )key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
● Copying will start at this time.
● Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
● To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the “CANCEL” key.
4
16
BORDER LINE
CANCEL OK
OK
1 2 3
4 5 6
7 8 9
0
C
P
CLEAR
PROGRAM AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
AUTO IMAGE
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
A3
4
16
BORDER LINE
CANCEL OK