Sharp AR-507 - Manual (Page 154)

8-14
CHAPTER
8
3. Enter the account number for which the price code is
set, and then press the “ENTER” key.
● To set a single price code for all accounts, press the “ALL
ACCOUNTS” key and then press the “ENTER” key.
4. Enter the price code (#1 - #3) and then press the “ENTER”
key.
● If only the “ENTER” key is pressed without entering any price
code, no price per code will be set.
5. Continue with steps 3 and 4 for other individual accounts.
● Press the “OK” key to exit the program.
Account Limit Setting
This program is used to set the maximum number of copies which can
be made against a registered account number.
When an optional printer expansion kit is installed, enabling of key
operator program “RECORD COPY AND PRINT PER ACCOUNT” will
disable the “ACCOUNT LIMIT SETTING”.
★ ★ ★ ★ ★ KEY OPERATOR See page 46 of the AR-PB2 A operation
manual for the setting of key operator program “RECORD COPY
AND PRINT PER ACCOUNT”.
When the “ACCOUNT LIMIT SETTING.” key is pressed, the following
display will appear.
To set a limit
1. Enter the account number to be limited.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
ACCOUNT LIMIT SETTING.
ALL ACCOUNTS
LIMIT CANCEL LIMIT ENTER
INPUT ACCOUNT NUMBER TO BE LIMITED.
OK
ACCOUNT
NUMBER
NUMBER OF
COPIES MADE MAXIMUM
-----
KEY OPERATOR PROGRAMS
PRICE/COPY SETTING
PRICE CODE PRESENT PRICE
#1
#2
#3 80
60
180
ENTER
ACCOUNT NUMBER PRICE CODE
# -----
OK
2/2
ALL ACCOUNTS
KEY OPERATOR’S GUIDE
Key operator programs