Siemens GIGASET C475 IP - Manual (Page 80)

79
Operating the base station answer machine
Activating/deactivating call screening
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Activating/deactivating call screening
During recording of a message you can screen a call via the handset loudspeaker.
Precondition: The number called is assigned to the handset as a receive number
(page 144).
Permanently activating/deactivating call screening
v
¢
Ð Settings
¢
Voice Mail
¢
Local AM
Call Screening
Select and press §OK§ ( = on)
a Press and hold (idle status).
Deactivating call screening for the current recording
You can deactivate the Call Screening function for the current call during recording via the
handset.
a
Briefly press the end call key.
Setting up the answer machine
The answer machine has already been preset at the factory. Make individual settings using
the handset.
Call acceptance/charge saving function for remote operation
You can set when you want the answer machine to accept a call.
The options are:
0 sec. , after 10 sec. , 18 sec. or 30 sec. and the cost-saving setting Automatic .
In Automatic mode, the following applies for call acceptance:
u If there are no new messages, the answer machine accepts a call after 18 seconds.
u If new messages are present, the answer machine accepts a call after 10 seconds.
When operating remotely you can tell after approx. 15 seconds that there are no new mes-
sages (otherwise the answer machine would already have accepted your call). There will
be no call charges if you hang up now.
v
¢
Ð Settings
¢
Voice Mail
¢
Local AM
¢
Ring Delay
r Select 0 sec. / 10 sec. / 18 sec. / 30 sec. / Automatic .
§Save§ Press the display key.
a Press and hold (idle status).
Setting the recording time
You can set the maximum recording time of a message. You can choose between: 60 Sec ,
120 Sec , 180 Sec or Maximum .
v
¢
Ð Settings
¢
Voice Mail
¢
Local AM
¢
Message Length
‰