beautypg.com

Operating the base station on the pabx, Changing the dialling mode, Setting recall – Siemens GIGASET C475 IP User Manual

Page 124: Setting pauses, Changing pause after line seizure

background image

123

Operating the base station on the PABX

Changing the dialling mode

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07

Ve

rs

ion 2.

1,

08.0

1.20

07

Operating the base station on the PABX

The following settings are only necessary when your PABX requires them; see the PABX

user guide. The settings only concern fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling Line Iden-

tification.

Changing the dialling mode

You can set the dialling mode.
v

¢

Ð

Settings

¢

Telephony

¢

Fixed Line

¢

Dialling Mode

Tone / Pulse

Select and press

§OK§

(

= on).

a

Press and hold (idle status).

Setting recall

You can set the recall option.
v

¢

Ð

Settings

¢

Telephony

¢

Fixed Line

¢

Recall

q

Select recall and press

§OK§

.

The current setting is indicated by .
a Press

and

hold (idle status).

Setting pauses

Changing pause after line seizure

You can set the length of the pause inserted between pressing the talk key

c and sending

the phone number.
v 5 5 O L
~

Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)

and press

§OK§

.

Please note:

– Suffix dialling (for selecting the connection) is not possible in conjunction with pulse dialling:

a hash "#" is displayed during dialling but ignored when pulse dialling is used.

– Enter an asterisk "*" to switch temporarily to tone dialling. The asterisk is not displayed.

This manual is related to the following products: