beautypg.com

Setting the telephone default connection, Assigning send and receive numbers to handsets – Siemens GIGASET C475 IP User Manual

Page 145

background image

144

Web configurator – configuring the telephone via a PC
Setting the telephone default connection

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 18.12.07

Ve

rs

ion 2.

1,

08.0

1.20

07

u

Connection paths over the Internet

u

If necessary, other applications that also use the DSL connection

In VoIP networks, voice quality is affected by various things including the "quality of serv-

ice" (QoS). If the entire infrastructure demonstrates QoS, voice quality is better (fewer

delays, less echoing, less crackling etc.).
If, for example, the router does not have QoS, then the voice quality is not as good. Please

see the specialist documentation for further information.

Setting the telephone default connection

The default telephone connection defines which line type (VoIP or fixed line network) will

be used to dial numbers when you briefly press the

c key. The default connection is

applied to all registered handsets.

¤

Open the following Web page:

Settings

¢

Telephony

¢

Number Assignment

.

¤

Enter the default connection in the

Linetype for outgoing calls

area. This can be done by

clicking on the

VoIP

or

Fixed Line

option.

¤

Now click

Set

to activate your settings.

Assigning send and receive numbers to handsets

You can assign up to eight numbers on your phone: your fixed line network number, your

Gigaset.net number and six VoIP numbers.
You can assign as many of these numbers as you like to each handset as receive numbers.

Receive numbers determine which handset(s) will ring when a call is received.
You can assign one of your VoIP numbers to each handset as a (VoIP) send number. Send

numbers define which VoIP account should be used in general to make and pay for outgo-

ing VoIP calls. Exceptions:

u

a phone number is dialled with a line suffix (page 134) or

u

a dialling plan has been defined for the phone number (page 149).

The Gigaset.net number and fixed line network number are permanently assigned to each

registered handset as send numbers.

¤

Open the following Web page:

Settings

¢

Telephony

¢

Number Assignment

.

Please note:

– The default connection is only relevant when dialling numbers that are not subject to dialling

plans and are entered without a line suffix.

– You can change the settings for the default connection via any registered handset (page 117).

Please note:

A handset is assigned the following numbers after it is registered on the base station:
– Receive numbers: all phone numbers assigned to the phone (fixed line network, Gigaset.net and

VoIP).

– Send numbers: the fixed line network number and the VoIP phone number that you entered at the

start of the phone configuration.

This manual is related to the following products: