beautypg.com

Activating voip status message display, Starting a firmware update – Siemens GIGASET C475 IP User Manual

Page 160

background image

159

Web configurator – configuring the telephone via a PC

Activating VoIP status message display

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 18.12.07

Ve

rs

ion 2.

1,

08.0

1.20

07

Example for an entry in vCard format:

BEGIN:VCARD

VERSION:2.1

N:Smith;Anna

TEL;HOME:1234567890

TEL;WORK:0299123456

TEL;CELL:0175987654321

EMAIL:[email protected]

BDAY:2008-01-12T11:00

X-SIEMENS-VIP:1

END:VCARD

Activating VoIP status message display

You can display VoIP status messages on your handset when there are VoIP connection

problems. These messages give you information on the status of a connection and contain

a provider-specific status code that helps the service team when they are analysing the

problem.

¤

Open the following Web page:

Settings

¢

Handsets

.

The settings are carried out in the

Miscellaneous

area.

¤

Click the

Yes

option next to

Show VoIP status on handset

to activate the status message

display.
If you click

No

, no VoIP status messages are displayed.

¤

Click

Set

to save the changes.

Starting a firmware update

If necessary, you can load updates of the base station firmware onto your phone.
The server on which Siemens makes new firmware versions available for your base station

is set by default. The URL of the Internet server is displayed in the

Data server

field.

You should only change this URL under exceptional circumstances (e.g. if requested to do

so due to erroneous behaviour). This address is also used to load provider information from

the Internet. You should therefore make a note of the default URL before you overwrite it.

Otherwise, you will only be able to reactivate the default URL by resetting the base station

back to the factory settings (page 115).

Please note:

A table with possible status codes and their meaning can be found in the appendix on page 167.

Please note:

– When updating from the Internet, checks are made to ensure that no newer version of the

firmware exists. If this is not the case, the operation is terminated.

– The firmware is only loaded from the Internet if you have not entered a local file in the

User defined

firmware file

field prior to the update.

This manual is related to the following products: