beautypg.com

Setting the phone's ip address in lan – Siemens GIGASET C475 IP User Manual

Page 122

background image

121

Making VoIP settings

Setting the phone's IP address in LAN

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07

Ve

rs

ion 2.

1,

08.0

1.20

07

Setting the phone's IP address in LAN

The base station requires an IP address in order to be "recognised" by the LAN.
The IP address can be assigned to the base station automatically (by the router) or manu-

ally.

u

If performed dynamically, the router's DHCP server automatically assigns the base sta-

tion an IP address. The base station's IP address can be changed according to router set-

tings.

u

If performed manually/statically, you assign the base station a static IP address. This

may be necessary depending on your network configuration.

v

¢

Ð

Settings

¢

Base

¢

Local Network

~

Enter the system PIN and press

§OK§

.

¤

Change multiple line input:

IP Address Type:

Select

Static

or

Dynamic

.

If you select

Static

, you must manually define the IP address and the subnet mask for the

base station in the next lines, as well as the standard gateway and DNS server.

IP Address:

For

IP Address Type

=

Dynamic

:

The IP address that is currently assigned to the base station will be displayed. It cannot

be amended.
For

IP Address Type

=

Static

:

Enter the IP address that is to be assigned to the base station (overwriting the current

settings).
192.168.2.2 has been preset.
For the IP address see also page 194.

Subnet Mask:

For

IP Address Type

=

Dynamic

:

The subnet mask that is currently assigned to the base station will be displayed. It can-

not be amended.
For

IP Address Type

=

Static

:

Enter the subnet mask that is to be assigned to the base station (overwriting the current

settings).
The default setting is 255.255.255.0
For the subnet mask see also page 199.

Please note:

– For how to make the local network settings on the Web configurator, turn to page 131.
– To assign the IP address dynamically, the DHCP server on the router must be activated. Please also

read the user guide for your router.

This manual is related to the following products: