Interphase Tech RAS Communications Controller 5536 - Manual (Page 207)

Appendix F: Quick Reference of Common Tasks
5536 PRI RAS Communications Controller Users Guide 187
Disconnect an
ISDN port
automatically when
no data traffic
occurs after a
specified length of
time 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Adapters tab.
3. From the adapter list, select Interphase 553X
ISDN RAS Support, and then click Properties.
4. On the RAS Support General dialog box, enter an
idle time-out value in the Idle Timeout field.
NOTE: This inactivity time-out is assigned to all of
the board’s ISDN channels.
Disconnect a digital
modem port
automatically when
no data traffic
occurs after a
specified length of
time 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Adapters tab.
3. From the adapter list, select Interphase 5536
Digital Modem RAS Support, and then click
Properties.
4. In the RAS Support General dialog box, enter an
idle time-out value in the Idle Timeout field.
NOTE: This inactivity time-out is assigned to all of
the board’s digital modem channels.
If you want to... Do this...