Displaying and saving events – Interphase Tech RAS Communications Controller 5536 User Manual
Page 176
Displaying and Saving Events
156
Interphase Corporation
N
OTE
If you want to test more than two B channels or more than
one port simultaneously, launch several instances of the
utility and repeat Steps
and
for each channel or port.
(You can change the number of frames sent if you want a
longer test. See
Specifying the Number of Frames to Send
5. After you have finished testing the ISDN line, re-enable
the RAS Server and the Acotec Virtual Motion RAS
Port Manager as follows:
a. From the Start menu, select Settings, and then
Control Panel. Then double-click the Services icon
to display the Services dialog box.
b. Select Remote Access Server from the list of
services, and click Start.
c. Select Virtual Motion RAS Port Manager from
the list of services, and click Start.
d. Click Close.
Displaying and Saving Events
The event list is an additional window at the bottom of the
LoopTest main dialog that displays communication events,
such as communication established between the two B
channels, and data being sent on one B channel.