Interphase Tech RAS Communications Controller 5536 - Manual (Page 199)

Appendix F: Quick Reference of Common Tasks
5536 PRI RAS Communications Controller Users Guide 179
Determine the
server name needed
to start the RAS
Server 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Identification tab. The displayed computer name
is the server name required by the RAS Server.
Know which port is
used when calling
with an ISDN RAS
port Note the following (assuming that the 5536-DM RAS
card is the only ISDN RAS-capable device):
In North America and Japan:
• Port #0: is used to call with ISDN 1 through 23
• Port #1: is used to call with ISDN 24 through 46
In Europe and Australia:
• Port #0: is used to call with ISDN 1 through 30
• Port #1: is used to call with ISDN 31 through 60
If you want to... Do this...