Interphase Tech RAS Communications Controller 5536 - Manual (Page 204)

Procedures
184 Interphase Corporation
Enable IPX routing The RIP for NWLink IPX Service must be installed
in the Windows NT Network Services list.
1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Protocols tab.
3. From the protocols list, select NWLink IPX/SPX
Compatible Transport, and then click
Properties.
If the protocol is not listed, you need to add it from
the Windows NT Server CD-ROM. See your
Windows NT documentation for information.
4. Select the Routing tab, and enable the Enable RIP
Routing option.
NOTE: IPX routing is activated only if different IPX
internal network numbers are assigned between the
two network cards. For more detailed information,
see the Microsoft networking online help.
Enable IP routing 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Protocols tab.
3. From the protocols list, select TCP/IP Protocol,
and then click Properties.
4. Select the Routing tab, and enable the Enable IP
Forwarding option.
If you want to... Do this...