Interphase Tech RAS Communications Controller 5536 - Manual (Page 184)

Determining the Current Port Mode
164 Interphase Corporation
Determining the Current Port Mode
N
OTE
The 5536-DM RAS is listed as the 5536-1P-PRI or 5536-2P-
PRI in Line Test utility dialog boxes.
To determine the port’s current mode:
1. From the Start menu, select Programs, then
Interphase WAN Adapters, and then Line Test. The
main Line Test dialog box appears.
Figure D-1. Line Test Dialog Box
On this dialog box, animated port icons and a text
message provide a continuously updated status of the
port mode.
Setting Port and Clock Modes
To set port and/or clock modes on the board:
1. Access the Line Test dialog box, as described in Step 1
of Determining the Current Port Mode on page 164 .