Interphase Tech RAS Communications Controller 5536 - Manual (Page 181)

Appendix C: LoopTest Utility
5536 PRI RAS Communications Controller Users Guide 161
Standard ISDN
messages Depending on the cause of an error, LoopTest might
display a standard ISDN message. Take the appropriate
action indicated by the message.
For example, if the message is No user response or
Incomplete address, check the ISDN number entered.
If the message is Destination is out of order or TEI lost
or refused, check your ISDN subscription. If the
message is Energy source missing or Physical level
activation problem, check your cable or connection.
For a complete list of standard ISDN cause messages,
see error messages in LoopTest online help.
Other messages You canceled the test in progress by clicking Stop.
Message Cause