Invacare Force - Manual (Page 72)

SECTION 9—OPTIONS
Recumbent Handcycle Series 72 Part No 1114850
8. Using two mounting bolts and locknuts, secure the rear wheel bar to the wheel tray.
9. Install the receiver onto the trailer hitch of the vehicle, according to the vehicle
manufacturerʹs instructions.
Using the Handcycle Rack
1. Position the handcycle on the rack with the front wheel in the wheel tray bracket.
2. Adjust the handcycle rack so the wheel tray bracket sits against the front wheel and
the rear wheel bar brackets sit against the rear wheels. Refer to Adjusting the
Handcycle Rack on page 73.
3. Secure the front wheel to the wheel tray bracket using the strap provided.
4. Secure the rear wheels to the rear wheel bar using the straps provided.
FIGURE 9.18 Assembling/Using/Adjusting the Handcycle Rack
Wheel Stop
Mounting
Positions
Wheel Tray Bracket
Mounting Bolt
and Locknut
Wheel Tray
Screws
Rear Wheel
Bar Bracket
Wheel Stop
Bracket
Receiver
Mounting Bolts
and Locknuts
Small Mounting
Bolts and Locknuts
Large Mounting
Bolts and Locknuts
Mounting Bolts
and Locknuts
Rear Wheel
Bar