Invacare Force - Manual (Page 38)

SECTION 6—RIDING POSITION
Recumbent Handcycle Series 38 Part No 1114850
Adjusting Seat Height - All Models Except XLT Gold
and Top End Force
NOTE: For this procedure, refer to FIGURE 6.8.
1. Loosen, but DO NOT remove the four socket screws securing the rear of the seat to the
handcycle frame.
2. Remove the two socket screws securing the front of the seat frame to the handcycle
frame.
3. Align the seat height adjustment clamp with the desired height adjustment hole in the
seat height adjustment bracket.
4. Install the two socket screws to secure the front of the seat frame to the handcycle
frame.
FIGURE 6.8 Adjusting Seat Height - All Models Except XLT Gold and Top End Force
Seat Angle
Adjustment
Clamps
Back Support Tube
Seat Frame
Front Socket Screw
Height Adjustment Bracket
Rear Socket Screws
Handcycle
Frame
Height Adjustment Clamp