Adjusting twenty-seven speed cassette chain, Adjusting – Invacare Force User Manual
Page 56
SECTION 8—SERVICE PROCEDURES
56
5. Run the chain around the bottom of the wheel sprocket and back up towards the hand
crank sprocket.
6. Attach the chain together using the master link (w/clip) provided.
7. To tension chain, refer to Refer to Replacing the Fork/Crank Assembly on page 46.
FIGURE 8.8 Installing Twenty-Seven Speed Cassette Chain
Adjusting Twenty-Seven Speed Cassette Chain
NOTE: For this procedure, refer to FIGURE 8.9.
1. Loosen, but DO NOT remove the clamp that secure the crank handles to the fork.
2. Slide the crank handles up and/or down until the proper tension on the chain is
achieved.
NOTE: The proper chain tension will be approximately ½‐inch of chain slack.
NOTE: If crank is in desired position but chain tension is not correct, links MUST be added to or
removed from the chain to correct the tension. This should be performed by a qualified technician.
3. Tighten the clamp that secure the crank handles to the fork securely.
STEP 5
STEP 4
STEP 3
Hand Crank Sprocket
Assembles
Chain Derailleur and Wheel Sprockets