Invacare A1541 User Manual

Safety summary, Positioning the front casters

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

ProSPIN™X4™Caster Swivel Locks

Model No. A1541

NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact
Carrier/Invacare for further instructions.

Safety Summary

To ensure the safe and proper installation of the caster locks, these instructions MUST

followed:

ƽ WARNING

DO NOT use this equipment without first reading and understanding this

instruction sheet and the owner’s manual supplied with wheelchair. If you are

unable to understand the warnings, cautions and instructions, contact a healthcare

professional, dealer or technical personnel if applicable, before attempting to install

this equipment - otherwise, injury or damage may occur.
ALWAYS consult with your physician or therapist to determine proper adjustment

and usage.
Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.
ALWAYS engage both front caster swivel locks and both rear wheel locks before

transferring to and from the wheelchair - otherwise injury or damage may occur.

Positioning the Front Casters

NOTE: For this procedure, refer to FIGURE 1.

1. Position both casters to face the front or

rear of the wheelchair to align the front
or rear lock plate hole with the caster
lock assembly.

NOTE: It is recommended that the front casters
be positioned toward the front of the wheelchair
for additional stability when transferring.

FIGURE 1 Positioning the Front Casters

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

Lock Plate Hole

Caster Lock

Assembly

Caster