Installing the safety flag using safety helmet, Installing seat positioning strap, Installing the computer – Invacare Force User Manual
Page 63
SECTION 9—OPTIONS
63
Installing Seat Positioning Strap
NOTE: For this procedure, refer to FIGURE 9.7.
1. Secure seat positioning strap to back canes using hardware provided.
FIGURE 9.7 Installing Seat Positioning Strap
Installing the Computer
NOTE: For this procedure, refer to FIGURE 9.8.
1. Install metal plug onto spoke of front wheel approximately 2 inches from wheel rim.
2. Align metal plug with fork assembly.
3. Secure sensor to fork using hardware provided.
NOTE: Slot in sensor MUST align with metal plug for mileage, etc. to be registered on the
computer.
4. Remove one of the chain guard screws and attach the computer mounting bracket.
5. Snap computer into mounting bracket.
FIGURE 9.8 Installing the Computer
Seat Positioning
Strap
Back Canes
Front Wheel Spoke
Metal Plug
Mounting Bracket
Sensor
Computer