Installing the draft bumper, Installing the safety flag, Using safety helmet – Invacare Force User Manual

Page 62

SECTION 9—OPTIONS

Installing the Draft Bumper

ƽ WARNING

DO NOT use if draft bumper extends past rear wheels. If draft bumper extends past

the rear wheels, contact dealer.

NOTE: For this procedure, refer to FIGURE 9.4.

NOTE: The draft bumper can not be installed if the tow bar is installed.

1. Remove the four set screws on each

mounting bracket.

2. Position the mounting brackets around

the handcycle rear frame.

NOTE: Make sure that the draft bumper is
centered on the handcycle rear frame.

3. Using four set screws for each

mounting bracket, secure the mounting
brackets to the handcycle rear frame.

FIGURE 9.4 Installing the Draft Bumper

Installing the Safety Flag

NOTE: For this procedure, refer to FIGURE 9.5.

1. Mount safety flag in holder secured to back tube on bike frame.

FIGURE 9.5 Installing the Safety Flag

Using Safety Helmet

NOTE: For this procedure, refer to
FIGURE 9.6.

1. Secure helmet using the chin strap.

2. Ensure proper fit.

FIGURE 9.6 Using Safety Helmet

Draft Bumper

Mounting Brackets

Set

Screws

Handcycle

Rear Frame

Mounting Brackets

Safety Flag

Holder

Back Tube

Helmet

This manual is related to the following products: