Adjusting/replacing the parking brake, Adjusting the parking brake, Replacing the parking brake – Invacare Force User Manual
Page 57: Adjusting/replacing the, Figure 8.9
SECTION 8—SERVICE PROCEDURES
57
FIGURE 8.9 Adjusting Twenty-Seven Speed Cassette Chain
Adjusting/Replacing the Parking Brake
ƽ WARNING
Before using your handcycle, inspect the parking brake for proper operation.
NOTE: For this procedure, refer to FIGURE 8.10.
Adjusting the Parking Brake
Cable
1. Loosen the hex nut and turn the adjuster barrel clockwise (tighten) or
counterclockwise (loosen) to adjust the cable. Retighten hex nut.
Brake Pads
1. Adjust the brake pad assembly so that when the parking brake is engaged the brake
pads rest solely on the rim of the wheel.
Replacing the Parking Brake
Brake Pads
1. Remove the mounting nuts and replace brake pads.
2. Secure with existing hardware and adjust.
Crank
Handle
Clamps
Fork