Mounting the safety light, Operating the safety light, Installing the water bottle – Invacare Force User Manual
Page 61: Installing/using the tow bar
SECTION 9—OPTIONS
61
Installing the Water Bottle
NOTE: For this procedure, refer to FIGURE 9.2.
1. Secure the water bottle mounting tube to the seat frame using the hardware provided.
NOTE: Make sure that the water bottle mounting bracket mounting holes are facing downward.
2. Attach the water bottle mounting bracket to the mounting tube using the hardware
provided.
3. Push water bottle into mounting bracket until secure.
FIGURE 9.2 Installing the Water Bottle
Installing/Using the Tow Bar
NOTE: For this procedure, refer to FIGURE 9.3.
NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid
wheelchairs with a tubular style footrest can be towed using the tow bar.
1. Remove the two set screws on each mounting bracket.
2. Position the mounting brackets around the handcycle rear frame.
NOTE: Make sure that the tow bar is centered
on the handcycle rear frame.
3. Using two set screws for each
mounting bracket, secure the mounting
brackets to the handcycle rear frame.
4. Secure the tow bar to the handcycle
with the mounting brackets and set
screws.
5. Secure the wheelchair to the tow bar
with the fastening strips provided.
FIGURE 9.3 Installing/Using the Tow Bar
Seat Frame
Mounting
Bracket
Water
Bottle
Mounting Tube
Tow Bar
Mounting
Bracket
Set Screws
Fastening Strip
Handcycle
Rear Frame