IBM SY27-0345-06 - Manual (Page 96)

| Figure A-2. Remote Connection to 14.4 Kbps Modem Port Feature (14T and 24x Models)
| Figure A-3. Remote Terminal Connection to the Primary or Secondary EIA-232 Service
| Port
|
Service Port Default Settings
| These are the default settings for the serial port:
| Speed 9600 bps
| Parity None
| Data Bits 8
| Stop Bits 1
| You can configure the service port speed for the following bit rates; however, the
| speed must match the speed configured for the ASCII terminal. The IBM 2210 also
| supports auto-baud.
| 300
| 1200
| 2400
| 4800
| 9600
| 19 200
| 38 400
|
Modem Support
| Modem Requirements
| The modem must be connected to the service port on the IBM 2210, use asynchro-
| nous operation, and be compatible with the Attention (AT) command set. A modem
| connected to a 2210 service port must be configured with the following character-
| istics:
| No echo
| Suppress results code
| Auto-answer
A-2 2210 Service and Maintenance