beautypg.com

Replacing the power supply for 14t and 24x models – IBM SY27-0345-06 User Manual

Page 75

background image

Replacing the Power Supply for 14T and 24x Models

1

Place the power supply on top of the insulator, being sure the regulator pro-
tection tab is perpendicular to the base of the unit. Replace the four hex
screws.

Fan Cable

LED Panel Cable

Power Supply Cable

Reset Cable

AC Power Ground

AC Power Cable

Figure

4-29. Connections to the Power Supply (14T and 24x Models)

2

Replace the connector to the ac power source.

3

Replace the connector from the adapter power supply, if installed, to the ac
power source.

Chapter 4. Removal and Replacement Procedures

4-25