Minolta Scanner Mode - Manual (Page 99)

5 Performing a Scan to Server (FTP) Operation
5-8 Scanner Mode
5.4 Specifying the Scanning Options
5.4.1 Quality & Reduction Screen
Quality tab
Select the scanning resolution.
“Standard” (200
× 100 dpi), “Fine” (200 × 200 dpi), “Super Fine” (400 × 400
dpi), “Text+Photo” (400 × 400 dpi), “GSR” (200 × 200 dpi), “Super GSR”
(400 × 400 dpi), “600dpi Text” (600 × 600 dpi), “600dpi Photo” (600 × 600
dpi), or “600dpi Photo+Text” (600
× 600 dpi)
Contrast tab
Touch [Lighter], [Normal] or [Darker] to select the desired scanning
contrast.
✎
Note
If “600dpi Text” or “600dpi Photo+Text” was selected on the Quality
tab, the contrast can only be set to one of three levels: “Lighter”,
“Normal” and “Darker”. (The two “Lighter” settings and the two
“Darker” settings are each the same contrast level.)