Minolta Scanner Mode - Manual (Page 45)

3 Preparation
3-12 Scanner Mode
POP3 Settings screen
The following parameters can be set from the POP3 Settings screen.
1 In the Network Settings screen, touch [POP3 Settings].
2 Specify the necessary settings for the parameters in the page that
appeared.
3 Touch [Enter].
Parameter Description
POP3 Server
Address Type in the IP address or host name for the
POP3 server.
*Both the host name and the IP address can be
typed in if the “DNS Setting” parameter is set to
“Yes”. If “No” is selected, only the IP address can
be typed in.
If necessary, change the port number of the
POP3 server.
POP3 User Name Type in the login name (account name) for the
POP3 server.
POP3 Password Type in the password for logging into the POP3
server.
Auto-RX Check Specify the interval for connecting to the POP3
server and checking for e-mail (Internet faxes).