Minolta Scanner Mode - Manual (Page 114)

Performing a Scan to HDD Operation 7
Scanner Mode 7-1
7 Performing a Scan to HDD Operation
7.1 Basic Transmission
1 Position the document(s) to be scanned.
2 Press the [Fax/Scan] key.
❍ For a copier, press the [Scan] key.
3 Select an index, and then
select a recipient from the
list of one-touch keys.
Specify the recipient in any
of the following ways.
❍ Select a recipient by
searching for it by name.
→ Refer to page 4-6.
❍ Type in the number of
the one-touch key for the
desired recipient.
→
Refer to page 4-8.
4 Touch [Quality&Reduction], and then adjust the image quality, density
and zoom ratio according to the document to be scanned.
❍ Refer to “Specifying the Scanning Options” on page 7-7.
5 Press the [Start] key.
The transmission begins.
If the document is placed on the original glass:
● When scanning multiple document pages, continue scanning by
placing each consecutive page on the original glass, then pressing the
[Start] key.