Multi-Tech Systems CDMA Wireless Modem - Manual (Page 50)

Chapter 6 – Network Service Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 50
Extended Roam Indication +WRMW
Description: This command is used to suppress output of non-standard Extended Roam Indicators (64
through 127) that are displayed by the +WROM unsolicited response. This setting is written
to NV and is persistent across resets.
Note: This command is not available in Sprint®. and Verizon®. software versions.
Values:
0: Suppress output of ERI indicators 64 through 127.
1: Enable output of ERI indicators 64 through 127.
Syntax: Command syntax: AT+WRMW=
Command Possible Responses
AT+WRMW=? +WRMW: (0-1)
OK
AT+WRMW?
Note: Display current setting. +WRMW: 0
OK
Note: ERI 64 through 127 suppressed.
AT+WRMW=1
Note: Enable output of ERI 64 through 127. OK
AT+WRMW?
Note: Display current setting. +WRMW: 1
OK
Note: ERI 64 through 127 displayed.