Multi-Tech Systems CDMA Wireless Modem - Manual (Page 149)

Chapter 18 - Fax Parameters
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 149
IS-707.3 Fax Parameters
Parameter Value (per) Description Type
+FNR EIA/TIA-592 Negotiation-message-reporting control
parameters Remote
+FNS EIA/TIA-592 Nonstandard-frame FIF parameter Remote
+FPA TIA/EIA/IS-134 Selective Polling Address Parameter Remote
[+FPI] EIA/TIA-592 2 Local-polling-ID-string parameter Remote
[+FPP] EIA/TIA-5924 Packet-protocol-control parameter Local
+FPR EIA/TIA-592 Serial port-rate-control parameter Local
[+FPS] EIA/TIA-592 5 Page-status parameter Remote
+FPW TIA/EIA/IS-134 Password parameter (Sending or Polling) Remote
[+FRQ] EIA/TIA-592 2 Receive-quality-threshold parameters Remote
+FRY EIA/TIA-592 ECM retry-value parameter Remote
+FSA TIA/EIA/IS-134 Sub address Parameter Remote
[+FSP] EIA/TIA-592 2 Request-to-poll parameter Remote
Notes
1. Use of option 3 may cause degradations in the quality of certain faxes.
2. Some values for this parameter are optional in EIA/TIA-592. In this standard, all parameters of this command
shall be supported.
3. Class 2.0 represents EIA/TIA-592.
4. Support of packet protocol is optional.
5. Values 4 and 5 of this parameter are optional.
IS-707.3 Fax Action Commands
Command Description Type
+FDR Receive Phase-C data. Remote
+FDT Transmit Phase-C data. Remote
+FIP Initialize facsimile parameters. Remote
+FKS Terminate session. Remote