Multi-Tech Systems CDMA Wireless Modem - Manual (Page 129)

Chapter 16 – Provisioning AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 129
Read SID/NID Entries +WSNR
Description: This command is used to read the current SID/NID list entries. The displayed entry will
always be the current value; including those changes made with the +WSID command prior
to being committed to NV with the +WCMT command.
Values:
0-19: Location in SID/NID list to read.
Syntax:
Command syntax: AT+WSNR=
Command Possible Responses
AT+WSNR=5
Note: Display entry 5 of SID/NID list. ERROR
Note: Service provisioning code not yet entered.
AT+WSPC=1,000000
AT+WSNR=5
Note: Display entry 5 of SID/NID list. OK
Note: Service code successfully entered.
+WSNR: 5, 123, 65535
OK
Note: Entry 5 of SID/NID list contains 123,65535.
AT+WSNR?
Note: Show last read SID/NID list
index. Default: 0. +WSNR: 5
OK
AT+WSNR=?
Note: Show SID/NID list index
range. +WSNR: (0-19)
OK