Multi-Tech Systems CDMA Wireless Modem - Manual (Page 148)

Chapter 18 - Fax Parameters
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 148
C
HAPTER
18 – F
AX
P
ARAMETERS
This chapter lists tables from the IS-707.3 fax parameters for user reference.
IS-707.3 Fax Parameters
Parameter Value (per) Description Type
+FAA EIA/TIA-592 Adaptive-answer parameter (see +FCLASS) Remote
+FAP TIA/EIA/IS-134 Addressing and polling capabilities parameter Remote
+FBO EIA/TIA-592 Phase-C data-bit-order parameter Remote
+FBS EIA/TIA-592 Buffer size parameter (read-only) Local
+FBU EIA/TIA-592 HDLC-frame-reporting parameter Remote
+FCC
VR
[BR]
WD
[LN]
[DF]
[EC]
BF
ST
EIA/TIA-592
0
1
2
3
1
EIA/TIA-592
EIA/TIA-592
2
EIA/TIA-592 2
EIA/TIA-592 2
EIA/TIA-592
EIA/TIA-592
DCE-capabilities parameters
Vertical-resolution sub-parameter
Bit-rate sub-parameter
• 2400 bits/s
• 4800 bits/s
• 7200 bits/s
• 9600 bits/s
Page-width sub-parameter
Page-length sub-parameter
Data-compression-format sub-parameter
Error-correction sub-parameter
Binary-file-transfer sub-parameter
Scan-time-per-line sub-parameter Remote
[+FCLASS]
0
1
2.0
3
Service-class selection parameter
• Class-0
• [Class-1 support unavailable]
• Class-2.0 fax service (EIA/TIA-592) Remote
+FCQ EIA/TIA-592 Copy quality-checking parameter Remote
[+FCR] EIA/TIA-592 2 Capability-to-receive parameter Remote
+FCS EIA/TIA-592 Current-session results parameters Remote
+FCT EIA/TIA-592 DTE Phase-C timeout parameter Remote
+FEA EIA/TIA-592 Phase-C received EOL-alignment parameter Remote
+FFC EIA/TIA-592 Format-conversion parameter Remote
+FHS EIA/TIA-592 Call termination-status parameter Remote
+FIE EIA/TIA-592 Procedure-interrupt-enable parameter Remote
+FIS EIA/TIA-592 Current session negotiation parameters Remote
[+FLI] EIA/TIA-592 2 Local-ID-string parameter (TSI or CSI) Remote
+FLO EIA/TIA-592 2 Flow-control-select parameter Local
+FLP EIA/TIA-592 Indicate-document-to-poll parameter Remote
+FMI EIA/TIA-592 Request DCE manufacturer identification See 4.3.5
+FMM EIA/TIA-592 Request DCE model See 4.3.5
+FMR EIA/TIA-592 Request DCE revision See 4.3.5
[+FMS] EIA/TIA-592 2 Minimum-Phase-C-speed parameter Remote