Base station ip address +cbip – Multi-Tech Systems CDMA Wireless Modem User Manual

Page 143

Text mode
Original mode

Chapter 17 – Extended AT Commands in IS707.3

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

143

Base Station IP Address +CBIP

Description: This read-only command is used to display the base station’s temporary IP address. The

value displayed is in standard IP address format.
Note: This command returns an IP value only during a data call when a temporary IP
address has been assigned. When not in a data call, this command returns “OK”.

Syntax:

Command syntax: AT+CBIP

Command

Possible Responses

AT+CBIP?
Note: Display the current setting

+CBIP: 198.229.142.65
OK
Note: Command is valid

AT+CBIP?
Note: Display the current setting

OK
Note: No IP address assigned.

AT+CBIP

ERROR
Note: Command is not valid