Multi-Tech Systems CDMA Wireless Modem - Manual (Page 117)

Chapter 15 – SIM TOOLKIT
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 117
SIM ToolKit Get Information +STGI)
Description: T his command allows you to get the information (text to display, Menu information,
priorities.) of a pro-active command sent from the SIM. The information is returned only after
receiving a SIM Toolkit indication (+STIN).
Syntax:
Command syntax: +STGI=
Command Possible Responses
+STGI= See following table.
+CME ERROR:
+STGI=?
Note: Display valid parameter range. +STGI: (0-11)
OK
Cmd Description Possible Responses
0 Get information about
‘Setup Menu’ pro-active command. +STGI:
+STGI: ,,,Info>[,]
+STGI: ,,,Info>[,]
[.]]
No action expected from SIM.
1 Get information about
‘Display text’ pro-active command. +STGI: ,,
No action expected from SIM.
2 Get information about ‘Get Inkey’
pro-active command. +STGI: ,[,]
SIM expects key pressed (+STGR).
3 Get information about ‘Get
Input’ pro-active command. +STGI: ,,,[,]
SIM expects key input (+STGR).
4 Get information about
‘Setup call’ pro-active command. +STGI: ,,,
SIM expects user authorization (+STGR).
5 Get information about ‘Play
Tone’ pro-active command. +STGI:
[,,,]
No action.
6 Get information about ‘Sel
Item’ pro-active command. +STGI: , menu>
+STGI: ,,,Info>[,]
+STGI: ,,,Info>[,]
[.]]
SIM expects an item choice (+STGR).
7 Get information about
‘Refresh’ pro-active command. +STGI:
No action (Refresh done automatically by product).
8 Get information about ‘Send SS’ pro-
active command. Currently not supported
9 Get information about ‘Send SMS’
pro-active command. +STGI:
No action (Send SMS done automatically by product).
10 Get information about ‘Send
USSD’ pro-active command Currently not supported
11 Get information about
‘SETUP EVENT LIST’ pro-
active command. +STGI: