Multi-Tech Systems CDMA Wireless Modem - Manual (Page 178)

Chapter 22 - Verizon® Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 178
Read message +CMGR (Chapter 8)
Description: This command allows the application to read stored messages. The messages are read
from the memory selected by +CPMS command. A message read with status “REC
UNREAD” will be updated in memory with the status “REC READ”.
Note: The parameter for SMS Status Reports is always “READ”.
Values:
tat> Status of message in memory. Possible values are as follows:
Possible Values Status of Messages in Memory
“UREAD” received unread messages
“READ” received read messages
“USENT” stored unsent messages
“SENT” stored sent messages
“ALL” all messages
Note: For SMS Status Reports, only “ALL” and “READ” values of the parameter will
list messages ; other values will only return OK.
: Origination/destination address value in string format. will be displayed
only if the message value is 0 (Normal).
: Message Reference
: Service Center Time Stamp in string format : “yy/MM/dd,hh :mm :ss±zz”
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
0 – Normal
1 – Interactive
2 – Urgent
3 – Emergency
: Message privacy:
0 – Normal
1 – Restricted
2 – Confidential
3 – Secret
: Message reply option:
0 – No Acknowledge
1 – Delivery Acknowledge
: Call Back Number
: Length of the text message (in bytes).
: Message text