Multi-Tech Systems CDMA Wireless Modem - Manual (Page 161)

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 161
Set Reverse Tunneling $QCMIPRT
Description: This command is used to set the reverse tunneling currently active profile.
Values:
0: Do not request reverse tunneling
1: Request reverse tunneling
0: Do not commit to NV
1: Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
the end of the following call if $QCMIPP is called.
Syntax:
Command syntax: AT$QCMIPRT=,
Command Possible Responses
AT$QCMIPRT?
Note: Display the current setting $QCMIPRT: 1,1
OK
Note: Command is valid
AT$QCMIPRT=?
Note: Display the range of values $QCMIPRT: (0-1), (0-1)
OK
Note: Command is valid
AT$QCMIPRT=1,1
Note: Set value to 1 and commit OK
Note: Command is valid
Set MN-AAA Shared Secrets $QCMIPMASS
Description: This command is used to set MN-AAA shared secrets for the currently active profile.
Values:
The shared secret text to be stored.
0: Do not commit to NV
1: Commit to NV
Note 1: Double quotes are only required if the string contains a command.
Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
at the end of the following call if $QCMIPP is called.
Syntax:
Command syntax: AT$QCMIPMASS =,
Command Possible Responses
AT$QCMIPMASS?
Note: Display the current setting $QCMIPMASS: Set
OK
Note: Command is valid
AT$QCMIPMASS=?
Note: Display the range of accepted
character values. $QCMIPMASS: (20,21,23-7E),(0-1)
OK
Note: ASCII hexadecimal character range supported by this
command. (All non-control codes.)
AT$QCMIPMASS= my5ecretC0de,0
Note: Non-committed value set OK
Note: MN-AAA is now: my5ecretC0de