Milan Technology MIL-SM2401M-STK - Manual (Page 93)

85
Create 802.1Q VLAN
Select to create a 802.1Q VLAN and add tagged /untagged member
ports to it.
1. VLAN Name: Type a name for the new VLAN using 15 alphanumeric
characters and no spaces.
2. VLAN ID: Type a VID (between 1~4096). The default is 1. There are 256
VLAN groups provided to configure.
3. Protocol VLAN: Press the Space key to choose the protocol type.
4. Member: Press the Space key to choose the VLAN member. There are
three selections:
UnTagged: This port is the member port of this VLAN group and
outgoing frames are NO VLAN-Tagged frames.
Tagged: This port is the member port of this VLAN group and
outgoing frames are VLAN-Tagged frames.
NO: The port is NOT member of this VLAN group.
5. Press “ESC” to return to the action menu line.
6. Select to save all configured values.
NOTE: If the trunk groups exist, it will be displayed (ex: TRK1, TRK2…) after
port26. The user can configure select if it is the member of the VLAN or not.
Actions->
: Configures all items. When finished, pressing ESC returns to the action
menu line.
: Saves all configured values.
: Displays previous page.
: Displays next page.