Milan Technology MIL-SM2401M-STK - Manual (Page 89)

81
6-3-5-1. VLAN Configure
Choose a VLAN
In the VLAN Configure menu select the type of VLAN you want to configure:
VLAN Disabled (default), Port Based VLAN, or IRRR802.1Q Tag based VLAN.
Save the configuration. There are 3 different options for VLANs to choose
from using the space bar: Disabled, Port Based and 802.1Q.
To configure a new VLAN, select Edit and then use the tab key to select items
you want to configure. The space bar allows you to select the different
options.
After adding a VLAN group, the configuration option Edit a VLAN Group will
allow you to change the membership by adding or deleting ports.
Port Based VLANs
These VLANs only apply to this switch. The VLANs can be overlapping,
meaning that any port can belong to more than one VLAN. One configuration
that is common for port based VLANs is to have all the ports on the switch on
separate VLANs except for the port that has the server connected. The port
connected to the server belongs to all the VLANs. This enables security
between ports but allows all ports access to the server. Up to 256 different port
based VLANs may be configured.
IEEE802.1Q VLANs
If IEEE802.1Q VLANs is selected, all the ports will belong to the default VLAN
1.