Milan Technology MIL-SM2401M-STK - Manual (Page 123)

115
Add SNMP Trap Managers
1. Press the key. Then press the key on this menu to add a
SNMP Trap Manager.
2. Enter the IP address and Community Name for the SNMP Trap Manager.
3. Press ESC to go back action menu line, and then select to save all
configured values.
Edit SNMP Trap Managers
1. Press key to modify a SNMP Trap Manager.
2. Choose the IP address and Community Name that you want to modify and
then press enter.
3. Enter the correct IP Address and Community Name.
4. Press ESC to go back action menu line, and then select to save all
configured values.